Running
Capacitors
- These Capacitors are Manufactured with High Grade
Heavy Edged Metalized Polypropylene Film. The film is wound
into Capacitor roll on microprocessor controlled. Computerized
high precision winding Machines in totally air-conditioned,
Due Free winding room. The Winding is Externally tight so
that there is no enough space between the Layer for corona
to Occur. The Element are Sprayed on both ends with Zinc
Metal to Connection of Metalized Electrodes. The Elements
are assembled into Plastic / Metal cases and are Sealed
for oil type capacitors oil is filled in metal case under
Vacuum Millborn Power Capacitor and Running Capacitors from
72 mfd to 216 mfd are provided with Inductor coil to control
the Inrush Current to the elements. This feature ensures
long-term stability of capacitors. |
| Capacitors
for Motors. Confirming to I.S. 2993. 440V |
Capacitors
for fans. Conforming to I.S.S. 1709. 400V/440V |
| Capacitance
Range (m.f.d.) |
Dimension
(D * h) in m.m. |
| |
Al
Can. |
Plastic
Can. |
| 3.15 |
30*52 |
30*52 |
| 4.0 |
30*52 |
30*52 |
| 5.02 |
30*52 |
30*52 |
| 6.0 |
30*52 |
30*52 |
| 7.0 |
30*52 |
30*52 |
| 8.0 |
30*52 |
30*52 |
| 10 |
40*72 |
40*72 |
| 12.5 |
40*72 |
40*72 |
| 15 |
45*72 |
45*72 |
| 20 |
40*125 |
45*125 |
| 25 |
45*125 |
45*125 |
| 30 |
45*95 |
45*125 |
| 36 |
50*128 |
50*125 |
| 50 |
54*120 |
54*120 |
|
| Capacitance
Range ( mfd.) |
Dimension
(D * H ) in m.m. |
| |
Al
can. |
Plastic
can. |
| 1.0 |
28*52 |
28*52 |
| 1.5 |
28*52 |
28*52 |
| 2.0 |
28*52 |
28*52 |
| 2.25 |
28*52 |
28*52 |
| 2.5 |
28*52 |
28*52 |
|
| |
| Capacitors
for Lighting Fixtures. Confirming to I. S. 1569 |
| Capacitance
Range (m. f. d.) |
Volts |
Dimension
(D*h) In m. m. |
| 3.15 |
440V |
30*52 |
| 4.0 |
250V |
28*52 |
| 8.0 |
250V |
35*52 |
| 10 |
250V |
35*72 |
| 15 |
250V |
40*72 |
| 20 |
250V |
40*72 |
| 33 |
250V |
45*90 |
| 42 |
250V |
45*90 |
|
|
We
can make capacitors also in other dimensions as per requirement
of customers. Due to improvement effected from time to time
the above specification and dimension can change without
N
Power
Capacitors
- MILLBORN capacitors is recognized as durability
and Versatile Design. An in depth understanding to markets
and the ability to respond with excellent products have
consistency supported our graph our creative vision coupled
with the ability to Translate the imaginations in to market
winning products. |
|
High Voltage Power Factor Correction
Capacitors
- These Units find Application in Improving Power
factor in high voltage system in the range 1/1.1 Kv to 6.6
K.V. Capacitors rated at 1/1.1 K.V. find extensive application
white carrying out heat run tests on large power transformers.
There are still some old installation in India which use 2.2
K.V. Voltage System. The Capacitors Rated at 3.3 K.V. and
6.6 K.V. find Extensive application those used across large
sized Motor Directly and those used in banks there numerous
other application besides. |
| Technical
Data |
| Standard
Sizes |
30,67,84
and 100 K.V.AR at 3.3 K.V., 1 Phase 50 Hz A.C. at 45
Degree C Ambient |
| Non Standard
Sizes |
42.56 and special
rating at 1,1.1,1.91,2.2,3.81,4 and 7 KV 1 Phase or
3 Phase, 50 Hz ARC. at 50 Degree C Ambient or any Other
Ambient |
| Permissible
Tolerances |
On
operating are +10% Maximum. On Output KVAr are + 5%
to 10% On measured Loss Angles are +10% |
|
MotorStart Capacitors
- |
| Others
Electrolytic |
Millborn
MPET |
Voltage |
230V |
250V |
| Surge
Voltage |
275V |
230V |
Tan
Delta |
4-7% |
<0.4% |
230V
With Stand |
<5
Min, <6 Min For prime quality, <3 Min for all
the rest |
>45
Min. |
275
With Stand |
<10
Sec. Max. |
>10
Min. |
Start
per hour |
Only
20 start per hour for not more than 3 seconds duration
each. |
No
restriction |
|
Note
: MPET can Reduce Motor cost by redesigning
aux. Winding to get more Capacitors Volts. |
