|
 |
|
|
SUBMERSIBLE PUMP
|
| HEAD |
5' |
Discharge |
400
LPH at 4 feet |
| CONSUMPTION |
18W/220V |
Suction |
Side |
| SHAFT |
Stainless
Steel |
- |
- |
|
 |
| HEAD |
8' |
Discharge |
600
LPH at 6 feet |
| CONSUMPTION |
50W/220V |
- |
400
LPH at 8 feet |
| SUCTION |
Side
& Bottom |
- |
- |
| SHAFT |
Ceramic |
- |
- |
|
 |
| HEAD |
5' |
Discharge |
400
LPH at 4 feet |
| CONSUMPTION |
18W/220V |
Suction |
Bottom |
| SHAFT |
Ceramic |
- |
- |
|
 |
| HEAD |
5' |
Discharge |
400
LPH at 8 feet |
| CONSUMPTION |
18W/220V |
Suction |
Bottom |
| SHAFT |
Ceramic |
- |
- |
|
Features |
Installation
and Use |
|
The
Pump can be Placed inside the Water. There is no Need
for any Clamp etc. |
|
The
Pump is with Suction Cups of High Sticking Capacity
which stick on the Surface |
| |
by
Simply Pressing Gently. If Surface is Uneven, a Piece if
Polished Surface like wall/floor Tile |
| |
Glass
of Acrylic Sheet can be Used under the Pump. The Pumps is
also Suitable for Operation |
| |
in
any Position, be it Vertical or Horizontal. |
| |
Multipurpose
Use |
- Operating
Well at Low Voltage
|
The
Pump Requires no Maintenance and is Built for long Life
Working. Cleaning the Pump also Amazingly simple. without
even a Screwdriver, You can open up the Pump so that even
the Impeller and Shaft can be taken Outland Cleaned. An
Opened Pump is shown below with Parts. the Impeller Cover
can be Rotated Counter -Clockwise and will come out by itself.
Impeller and the Spindle (Shaft) can be taken out and Cleaned.
Cleaning will be Required in Case of Dust/Dirt Settles in
due to long non use or use in Dirty Water. after Cleaning
with Water you may like to put two drop of Oil on the Spindle,
Before just Clicking everything back again. Estimated Time
Require for Opening, Cleaning is about 2 minutes. The Pump
has now been Serviced. There is no Need of any Mechanic.
The Motor Unit is Sealed, Please do not try to open the
same. |
|
|
